--- drivers/net/wireless/bcmdhd/dhd_sec_feature.h
+++ drivers/net/wireless/bcmdhd/dhd_sec_feature.h
@@ -1,8 +1,5 @@
/*
- * Header file describing the internal (inter-module) DHD interfaces.
- *
- * Provides type definitions and function prototypes used to link the
- * DHD OS, bus, and protocol modules.
+ * Customer HW 4 dependant file
*
* Copyright (C) 1999-2012, Broadcom Corporation
*
@@ -24,72 +21,79 @@
* software in any way with any other Broadcom software provided under a license
* other than the GPL, without Broadcom's express prior written consent.
*
- * $Id: dhd_sec_feature.h 309548 2012-01-20 01:13:08Z $
+ * $Id: dhd_sec_feature.h$
*/
+#ifndef _dhd_sec_feature_h_
+#define _dhd_sec_feature_h_
+
/* PROJECTS */
-#if defined(CONFIG_MACH_SAMSUNG_ESPRESSO)\
- || defined(CONFIG_MACH_SAMSUNG_ESPRESSO_10)
+#if defined(CONFIG_MACH_SAMSUNG_ESPRESSO) || defined(CONFIG_MACH_SAMSUNG_ESPRESSO_10)
#define READ_MACADDR
#define HW_OOB
-#endif
+#endif /* CONFIG_MACH_SAMSUNG_ESPRESSO && CONFIG_MACH_SAMSUNG_ESPRESSO_10 */
/* Q1 also uses this feature */
#if defined(CONFIG_MACH_U1) || defined(CONFIG_MACH_TRATS)
#ifdef CONFIG_MACH_Q1_BD
#define HW_OOB
-#endif
+#endif /* CONFIG_MACH_Q1_BD */
#define USE_CID_CHECK
#define WRITE_MACADDR
-#endif
+#endif /* CONFIG_MACH_U1 || CONFIG_MACH_TRATS */
#ifdef CONFIG_ARCH_MSM7X30
#define HW_OOB
#define READ_MACADDR
-#endif
+#endif /* CONFIG_ARCH_MSM7X30 */
-#if defined CONFIG_MACH_GC1 || defined CONFIG_MACH_U1_NA_SPR
+#if defined CONFIG_MACH_GC1 || defined CONFIG_MACH_U1_NA_SPR\
+ || defined CONFIG_MACH_KONA
#undef USE_CID_CHECK
#define READ_MACADDR
-#endif
+#endif /* CONFIG_MACH_GC1 || CONFIG_MACH_U1_NA_SPR */
#ifdef CONFIG_MACH_P10
#define READ_MACADDR
-#endif
+#endif /* CONFIG_MACH_P10 */
#ifdef CONFIG_ARCH_MSM8960
#undef WIFI_TURNOFF_DELAY
#define WIFI_TURNOFF_DELAY 200
#endif
+#ifdef CONFIG_MACH_M0
+#define WL11U
+#endif
+
/* REGION CODE */
#if (WLAN_REGION_CODE >= 100) && (WLAN_REGION_CODE < 200) /*EUR*/
#if (WLAN_REGION_CODE == 101) /*EUR ORG*/
/* GAN LITE NAT KEEPALIVE FILTER */
#define GAN_LITE_NAT_KEEPALIVE_FILTER
-#endif
-#endif
+#endif /* WLAN_REGION_CODE == 101 */
+#endif /* WLAN_REGION_CODE >= 100 && WLAN_REGION_CODE < 200 */
#if (WLAN_REGION_CODE >= 200) && (WLAN_REGION_CODE < 300) /* KOR */
#undef USE_INITIAL_2G_SCAN_ORG
#ifndef ROAM_ENABLE
#define ROAM_ENABLE
-#endif
+#endif /* ROAM_ENABLE */
#ifndef ROAM_API
#define ROAM_API
-#endif
+#endif /* ROAM_API */
#ifndef ROAM_CHANNEL_CACHE
#define ROAM_CHANNEL_CACHE
-#endif
+#endif /* ROAM_CHANNEL_CACHE */
#ifndef OKC_SUPPORT
#define OKC_SUPPORT
-#endif
+#endif /* OKC_SUPPORT */
#ifndef ROAM_AP_ENV_DETECTION
#define ROAM_AP_ENV_DETECTION
-#endif
+#endif /* ROAM_AP_ENV_DETECTION */
#undef WRITE_MACADDR
#undef READ_MACADDR
@@ -97,27 +101,29 @@
#define READ_MACADDR
#else
#define RDWR_MACADDR
-#endif
+#endif /* CONFIG_BCM4334 */
#if (WLAN_REGION_CODE == 201) /* SKT */
-#endif
+#endif /* WLAN_REGION_CODE == 201 */
#if (WLAN_REGION_CODE == 202) /* KTT */
#define VLAN_MODE_OFF
#define KEEP_ALIVE_PACKET_PERIOD_30_SEC
#define FULL_ROAMING_SCAN_PERIOD_60_SEC
-#endif
+#endif /* WLAN_REGION_CODE == 202 */
#if (WLAN_REGION_CODE == 203) /* LGT */
-#endif
-#endif
+#endif /* WLAN_REGION_CODE == 203 */
+#endif /* WLAN_REGION_CODE >= 200 && WLAN_REGION_CODE < 300 */
#if (WLAN_REGION_CODE >= 300) && (WLAN_REGION_CODE < 400) /* CHN */
#define BCMWAPI_WPI
#define BCMWAPI_WAI
-#endif
+#endif /* WLAN_REGION_CODE >= 300 && WLAN_REGION_CODE < 400 */
-#if !defined(READ_MACADDR) && !defined(WRITE_MACADDR) && !defined(RDWR_KORICS_MACADDR) && !defined(RDWR_MACADDR)
+#if !defined(READ_MACADDR) && !defined(WRITE_MACADDR)\
+ && !defined(RDWR_KORICS_MACADDR) && !defined(RDWR_MACADDR)
#define GET_MAC_FROM_OTP
-#endif
+#endif /* !READ_MACADDR && !WRITE_MACADDR && !RDWR_KORICS_MACADDR && !RDWR_MACADDR */
+#endif /* _dhd_sec_feature_h_ */
projects / ziggy471-sgs3-jb.git / blobdiff